User:Shawndouglas/sandbox/sublevel1

From LIMSWiki
Jump to navigationJump to search

NOTE: Information shown here may rapidly become outdated given how quickly response to pandemic testing can change. A full attempt to keep the content relevant will be made.

CDC 2019-nCoV Real-time RT-PCR Panel (Research Use Only)

Early in the COVID-19 pandemic, laboratory guidance for testing for SARS-CoV-2 was relatively quick to evolve. The timely development and organized use of accurate assays and meaningful screening protocols, however, has been inconsistent but improving worldwide, with some countries more urgently and agilely responding than others.[1][2][3] With any novel virus, clinicians and public health experts are dealing with unknown factors. However, public health organizations and agencies have had a base to work from when creating laboratory testing guidance for a novel coronavirus, with more than 40 years of experience with coronavirus biology, pathogenesis, and diagnosis.[4] And while there are fundamental differences between SARS-CoV-2 and its predecessor SARS-CoV, they still share approximately 70 to 80 percent of their genetic code.[5][6] In fact, the WHO had draft guidance for laboratory testing out as early as January 10, 2020, before gene sequencing was even completed.[7] This guidance and similar draft guidance from national public health organizations and agencies have received steady revisions since as understanding of the virus has grown.

Similar to its predecessors SARS-CoV and MERS-CoV, RT-PCR has largely been the predominant diagnostic method used in guidance for detecting SARS-CoV-2's RNA in specimens and thus laboratory confirmation of COVID-19 cases. Other diagnostic methods such as isothermal amplification (e.g., LAMP) and antigen testing have also emerged as the pandemic has progressed. Serology has its place in testing as well, though with similar lessons from SARS and MERS that it's best used to test for past infection (typically after 14 days of suspected contact with a carrier, or mild symptoms) and thus potential short-term immunity due to the presence of antibodies in blood. It also has other uses; in its September 2020 guidance, the WHO said: "If negative NAAT results are obtained from a patient in whom SARS-CoV-2 infection is strongly suspected, a paired serum specimen could be collected."[8] On April 3, the U.S. Food and Drug Administration (FDA) approved the country's first COVID-19 serology test, created by Cellex, though Mayo Clinic was also on the verge of rolling out its own in-house serology test as well[9] As of September 2021, the U.S. FDA has granted emergency use authorizations (EUA) for 88 serology/antibody tests.[10] (Note: Johns Hopkins also appears to be maintaining a page tracking approved serology tests around the world.)

Primary testing guidance

The following sample collection and test procedures have evolved from the COVID-19 pandemic (note that this is only a summary; consult the cited literature directly for full details)[8][11][12][13][14]:

  • Determine that the patient is indicating clinical and/or epidemiological evidence of COVID-19 (meets case definitions). Early on in the pandemic, case definitions and testing criteria were initially strict due to lack of test kits[15][16][17], but test kit availability has ramped up since, allowing for testing a wider group of symptomatic patients, as well as asymptomatic patients. However, clinicians are still encouraged to consider other causes for respiratory illness.[11]
  • Collect at a minimum an upper respiratory tract (URT) specimen. Some guidance like that found in the U.K. also suggests collecting lower respiratory tract (LRT) specimens, whenever possible.[13] Broadly, it appears lower respiratory tract specimens such as sputum and bronchoalveolar lavage fluid are a more reliable specimen type for RT-PCR applications, as they have been shown to contain the highest viral load, in comparison to upper respiratory tract specimens.[18][19] In most cases, a URT will be sufficient; however, an LRT is especially useful when a patient tests negative with a URT but is still high suspicious of having COVID-19. Yet, as Wang et al. point out, "testing of specimens from multiple sites may improve the sensitivity and reduce false-negative test results,"[18] which is largely reflected in WHO, CDC, Public Health England (PHE), and Public Health Laboratory Network (PHLN; Australia) testing guidance.
Slight differences in upper respiratory tract specimen collection procedures can be found between the WHO/CDC and PHE/PHLN. Both the WHO and CDC offer nasopharyngeal and oropharyngeal swabs as options. The WHO doesn't appear to give a preference, whereas the CDC has a preference for nasopharyngeal swabs but maintains oropharyngeal as still remaining "an acceptable specimen type."[12] In comparison, the latest PHE and PHLN guidance prefer the approach of collecting from both pharynx locations—even with the same swab—"to optimize the chances of virus detection."[14] Nasopharyngeal aspiration is also an acceptable sample collection method for the upper respiratory tract according to all mentioned entities except the PHLN, which appears to have removed mention of nasopharyngeal aspirate from its guidance sometime in 2021.[14]
Regarding serum specimens, statements differ slightly. The WHO notes serology to be useful for retrospective case definition, using paired specimens from the acute and convalescent phases of the disease. The CDC doesn't make reference to serum or serology in their clinical specimen guidance. The PHE used to suggest hospital patients have "a sample for acute serology" taken, but that appears to have been removed from 2021 guidance.[13] The PHLN initially provided similar advice as the WHO, but in late April they expanded their guidance to discuss the value of serology.[14] They have also added collection recommendations for serology, in separate guidance, indicating that "serological testing before two weeks from the onset of symptoms may result in false negative results."[20]
Finally, and more recently, potential evidence of saliva having diagnostic value for detecting SARS-CoV-2 has arisen. Xu et al. noted in published April 2020 research that the "diagnostic value of saliva specimens for ... nucleic acid examination remains limited but promising."[21] Another paper published in September 2020 provided similar thoughts, though was generally more optimistic than the paper published by Xu et al., suggesting saliva from the opening of the mouth (in contrast to Xu et al. and their finding of better results from saliva in the throat) may be viable specimen.[22] In fact, an April 2020 EUA by the FDA had been made for the first saliva-based COVID-19 test, produced by Vault Health, Inc.[23]
As these and similar studies have been peer reviewed and methods validated, saliva has increasingly looked like a viable sample type. The CDC updated their guidance in October 2020 regarding saliva as a testing substrate. The CDC now notes: "Collect 1-5 ml of saliva in a sterile, leak-proof screw cap container. No preservative is required."[12] This is presumably in conjunction with tests approved for the use of saliva. Australia's PHLN updated their guidance in 2021 to include a full section on saliva testing and how to approach it, though cautioning it "does not advise routine use of saliva for diagnostic testing except in specific situations."[14]
  • Conduct testing. NAAT methods like qRT-PCR have been the primary tools for diagnosing SARS-CoV-2 infection due to their high sensitivity. The PHLN provides the most background about PCR in their guidance, noting that "RT-PCR or TMA are the methods of choice to detect SARS-CoV-2 during the acute illness."[14] Viral cultures are little mentioned, though the PHLN underscores the idea that viral cultures for routine diagnoses are "of limited utility" and, if attempted, should only be performed in Biosafety Level 3 (BSL-3) laboratories.[14] As of August 2020, only the PHLN has made any specific recommendations for how serological testing should be conducted for testing past cases of COVID-19.[14] The current set of approved serology tests from around the world appear to use lateral flow immunoassay, ELISA, or neutralization methods.[17] Also note that at least in the U.S., the FDA in October 2020 discontinued review and approval of laboratory developed tests (LDTs), in favor of tests that would be more likely to increase access to testing or overall test capacity.[24]
  • Confirm the results. The WHO notes that optimally a positive result should come from a NAAT method "with at least two independent targets on the SARS-CoV-2 genome." However, they recognize that "in areas with widespread transmission of SARS-CoV-2, a simple algorithm might be adopted with one single discriminatory target," though monitoring of potential mutations is recommended.[8] Most guidance notes that if testing produces one or more negative results, that doesn't necessarily rule out SARS-CoV-2 infection. If suspicion of infection remains high, particularly if only upper respiratory tract specimens were collected, additional specimens from the lower respiratory tract should be collected and analyzed. They also emphasize that both external and internal controls should be applied to NAAT runs to limit the chance of incorrect results.
  • Report using state and, if applicable, national reporting requirements. (See the next chapter for more on reporting.) Regardless of result, the final positive or negative laboratory confirmation should also be reported to state and national authorities. In the U.S., for example, this means reporting to the local or state health department using the CDC's COVID-19 Worksheet. In Canada, reports are sent to the Public Health Agency of Canada (PHAC) via their Coronavirus Diseases (COVID-19) Case Report Form.

Additional considerations for point-of-care testing and self-collection

One of the long-term goals of healthcare professionals, governments, and test kit manufacturers has been to develop and increase access to point-of-care (POC) testing solutions for COVID-19. This has come with many challenges, but it is largely being realized. The CDC continues to update its Guidance for SARS-CoV-2 Point-of-Care and Rapid Testing[25], and, after the first "collect and test" at-home kit—the Lucira COVID-19 All-In-One Test Kit—was approved by the FDA in November 2020[26], many more were eventually approved for emergency use.[27] However, while these easy-use or quick-result tests are promising and welcome, a few additional testing considerations come with them. For example, the CDC has indicated that though FDA-authorized POC tests are approved for symptomatic individuals, "CLIA will temporarily allow CLIA-certified laboratories and other testing sites to use SARS-CoV-2 point-of-care and rapid antigen tests on asymptomatic people for the duration of the COVID-19 public health emergency."[25] Other recommendations include not reusing test devices or components, changing gloves at strategic points, and limiting opening of test materials until ready to begin testing.[25]

In some cases, such as drive-through testing sites, patient self-collection of a sample may be required. In these cases, it's vital that the patient is given clear and concise instructions on how to collect the sample before they begin the process. The American Association for Clinical Chemistry (AACC) notes that false-negative results are more likely with poor instruction and recommends healthcare providers provide patients with written or video instructions, along with any verbal instructions. Less invasive nasal swabs are typically being used in this case. During self-collection, the patient inserts the entire swab tip in one nasal cavity, makes four to five sweeping circles along the nasal wall for about 10 to 15 seconds, and then repeats the process in the opposite nostril.[28]

In the case of at-home test kits, instructions for sample collection and system use should be followed carefully. For example, the Lucira All-In-One Test Kit can be used in a CLIA-certified lab or "for prescription home use," meaning a healthcare provide must approve a prescription in order for the patient can use the test at home. Additionally, the healthcare provider will still be held responsible for reporting the test results they receive from the patient using the kit at home.[29]

Mitigating risk associated with false negatives

Before moving on, words of caution should be issued in regard to any COVID-19 testing conducted: false-negative results can be problematic.[30][31] One of the primary reasons they are problematic is that it may leave an otherwise asymptomatic individual to continue to unknowingly spread the virus further. Those individuals may relax physical distancing measures and become lax with their mask wearing, affecting others outside the clinical setting. Inside a clinical setting, a patient with a false negative "may be sent to the frontlines of care and inadvertently transmit the virus to patients and colleagues, further straining the already precarious ability of the health care system to respond to the pandemic."[31]

In a perspective piece published in Mayo Clinic Proceedings, West et al. of the Mayo Clinic offer four critical recommendations for society as we attempt to mitigate the risk associated with false negatives when performing clinical testing for COVID-19. Those recommendations are[31]:

1. Continue protective and preventative measures inside and outside the testing facility. This includes efforts such as physical distancing, regular hand-washing, regular disinfection of surfaces, and adequate personal protective equipment (PPE) for clinical staff (as well as the encouragement of proper mask wearing by others).
2. Develop and improve PCR and serological assays to be more sensitive and specific. The development and improvement process must include methodologically rigorous studies designed to limit the risk of biased results, as well as clearly reported test performance characteristics.
3. Assess patients carefully for their potential risk level for being infected. Confidence in negative test results may need to be lowered for health care workers and individuals in other high-risk groups. In general, given the uncertainty around viral load, asymptomatic transmission, and other disease characteristics, caution should be used with negative results in general.
4. Establish risk-based protocols for managing negative COVID-19 results. Truly low-risk individuals may not be a major concern when results come back negative. However, individuals in higher-risk categories may require more judicious protocols, e.g., delaying a return to a workplace (for self-isolation) despite receiving a negative and having no symptoms. (This may require a more sensitive follow-up test or at least a second negative in a repeat test, particularly among clinical workers.)

References

  1. Subbaraman, N.; Callaway, E. (23 March 2020). "Coronavirus tests: Researchers chase new diagnostics to fight the pandemic". Nature - News Explainer. doi:10.1038/d41586-020-00827-6. https://www.nature.com/articles/d41586-020-00827-6. Retrieved 05 April 2020. 
  2. Apuzzo, M.; Gebrekidan, S. (20 March 2020). "Can’t Get Tested? Maybe You’re in the Wrong Country". The New York Times. https://www.nytimes.com/2020/03/20/world/europe/coronavirus-testing-world-countries-cities-states.html. Retrieved 05 April 2020. 
  3. Hindsley, G. (28 March 2020). "The Lost Month: How a Failure to Test Blinded the U.S. to COVID-19". The New York Times. https://www.nytimes.com/2020/03/28/us/testing-coronavirus-pandemic.html. Retrieved 05 April 2020. 
  4. Denison, M.R. (2004). "Coronavirus Research: Keys to Diagnosis, Treatment, and Prevention of SARS". Learning from SARS: Preparing for the Next Disease Outbreak. Institute of Medicine. pp. 137–72. doi:10.17226/10915. ISBN 9780309182157. https://www.nap.edu/read/10915/chapter/5. 
  5. Ceccarelli, M.; Berretta, M.; Venanzi Rullo, E. et al. (2020). "Differences and similarities between Severe Acute Respiratory Syndrome (SARS)-CoronaVirus (CoV) and SARS-CoV-2. Would a rose by another name smell as sweet?". European Review for Medical and Pharmacological Sciences 24 (5): 2781-2783. doi:10.26355/eurrev_202003_20551. PMID 32196628. 
  6. Wilder-Smith, A.; Chiew, C.J.; Lee, V.J. (2020). "Can we contain the COVID-19 outbreak with the same measures as for SARS?". The Lancet Infectious Diseases. doi:10.1016/S1473-3099(20)30129-8. PMC PMC7102636. PMID 32145768. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7102636. 
  7. World Health Organization (10 January 2020). "Laboratory testing of human suspected cases of novel coronavirus (nCoV) infection: Interim guidance 10 January 2020". WHO/2019-nCoV/laboratory/2020.1. World Health Organization. https://apps.who.int/iris/bitstream/handle/10665/330374/WHO-2019-nCoV-laboratory-2020.1-eng.pdf. Retrieved 05 April 2020. 
  8. 8.0 8.1 8.2 World Health Organization, et al. (11 September 2020). "Diagnostic testing for SARS-CoV-2". WHO/2019-nCoV/laboratory/2020.6. World Health Organization. https://apps.who.int/iris/handle/10665/334254. Retrieved 18 November 2020. 
  9. Terry, M. (3 April 2020). "Cellex and Mayo Clinic Launch Tests to Determine COVID-19 Immunity from Previous Exposure". BioSpace. https://www.biospace.com/article/fda-approves-1st-covid-19-antibody-test/. Retrieved 05 April 2020. 
  10. "In Vitro Diagnostics EUAs". U.S. Food and Drug Administration. 20 August 2020. https://www.fda.gov/medical-devices/coronavirus-disease-2019-covid-19-emergency-use-authorizations-medical-devices/vitro-diagnostics-euas#individual-serological. Retrieved 23 August 2020. 
  11. 11.0 11.1 Centers for Disease Control and Prevention (2 August 2021). "Overview of Testing for SARS-CoV-2". Centers for Disease Control and Prevention. https://www.cdc.gov/coronavirus/2019-ncov/hcp/testing-overview.html. Retrieved 06 September 2021. 
  12. 12.0 12.1 12.2 Centers for Disease Control and Prevention (26 February 2021). "Interim Guidelines for Collecting and Handling of Clinical Specimens for COVID-19 Testing". Centers for Disease Control and Prevention. https://www.cdc.gov/coronavirus/2019-nCoV/lab/guidelines-clinical-specimens.html. Retrieved 06 September 2021. 
  13. 13.0 13.1 13.2 Public Health England (29 March 2021). "COVID-19: Guidance for sampling and for diagnostic laboratories". U.K Government. https://www.gov.uk/government/publications/wuhan-novel-coronavirus-guidance-for-clinical-diagnostic-laboratories. Retrieved 06 September 2021. 
  14. 14.0 14.1 14.2 14.3 14.4 14.5 14.6 14.7 Public Health Laboratory Network (22 June 2021). "PHLN guidance on laboratory testing for SARS-CoV-2 (the virus that causes COVID-19)". Department of Health, Australian Government. https://www.health.gov.au/resources/publications/phln-guidance-on-laboratory-testing-for-sars-cov-2-the-virus-that-causes-covid-19. Retrieved 06 September 2021. 
  15. Centers for Disease Control and Prevention (27 April 2020). "Evaluating and Testing Persons for Coronavirus Disease 2019 (COVID-19)". Centers for Disease Control and Prevention. Archived from the original on 01 May 2020. https://web.archive.org/web/20200501002841/https://www.cdc.gov/coronavirus/2019-ncov/hcp/clinical-criteria.html. Retrieved 08 July 2020. 
  16. Branswell, H. (4 April 2020). "CDC launches studies to get more precise count of undetected Covid-19 cases". STAT. https://www.statnews.com/2020/04/04/cdc-launches-studies-to-get-more-precise-count-of-undetected-covid-19-cases/. Retrieved 05 April 2020. 
  17. 17.0 17.1 Center for Health Security (26 August 2021). "Serology tests for COVID-19". Johns Hopkins University. https://www.centerforhealthsecurity.org/covid-19TestingToolkit/serology/Serology-based-tests-for-COVID-19.html. Retrieved 06 September 2021. 
  18. 18.0 18.1 Wang, W.; Xu, Y.; Gao, R. et al. (2020). "Detection of SARS-CoV-2 in Different Types of Clinical Specimens". JAMA. doi:10.1001/jama.2020.3786. PMC PMC7066521. PMID 32159775. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7066521. 
  19. Yu, F.; Yan, L.; Wang, N. et al. (2020). "Quantitative Detection and Viral Load Analysis of SARS-CoV-2 in Infected Patients". Clinical Infectious Diseases: ciaa345. doi:10.1093/cid/ciaa345. PMID 32221523. 
  20. Public Health Laboratory Network (3 September 2020). "PHLN guidance for serological testing in COVID-19" (Word). Department of Health, Australian Government. https://www.health.gov.au/sites/default/files/documents/2020/09/phln-guidance-for-serological-testing-in-covid-19-phln-guidance-on-serological-testing-in-covid-19.docx. Retrieved 06 September 2021. 
  21. Xu, R.; Cui, B.; Duan, X. et al. (2020). "Saliva: Potential diagnostic value and transmission of 2019-nCoV". International Journal of Oral Science 12: 11. doi:10.1038/s41368-020-0080-z. 
  22. Wyllie, A.L.; Fournier, J.; Casanovas-Massana, A. et al. (2020). "Saliva or Nasopharyngeal Swab Specimens for Detection of SARS-CoV-2". New England Journal of Medicine 383: 1283–6. doi:10.1056/NEJMc2016359. PMC PMC7484747. PMID 32857487. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7484747. 
  23. Vault Health (14 April 2020). "Vault Health Launches First-of-its-Kind Saliva-based FDA EUA Approved Test for COVID-19". PR Newswire. https://www.prnewswire.com/news-releases/vault-health-launches-first-of-its-kind-saliva-based-fda-eua-approved-test-for-covid-19-301039633.html. Retrieved 01 May 2020. 
  24. Fox, A. (12 October 2020). "EUAs for Laboratory Developed COVID-19 Tests Will No Longer Be Reviewed by the FDA". JDSupra. https://www.jdsupra.com/legalnews/euas-for-laboratory-developed-covid-19-91593/. Retrieved 18 November 2020. 
  25. 25.0 25.1 25.2 Centers for Disease Control and Prevention (13 November 2020). "Guidance for SARS-CoV-2 Point-of-Care Testing". Centers for Disease Control and Prevention. https://www.cdc.gov/coronavirus/2019-ncov/lab/point-of-care-testing.html. Retrieved 07 September 2021. 
  26. Romo, V. (17 November 2020). "FDA Approves 1st At-Home Coronavirus Test". NPR. https://www.npr.org/sections/coronavirus-live-updates/2020/11/17/936055284/fda-approves-first-at-home-coronavirus-test. Retrieved 18 November 2020. 
  27. "In Vitro Diagnostics EUAs - Antigen Diagnostic Tests for SARS-CoV-2". U.S. Food and Drug Administration. 7 September 2021. https://www.fda.gov/medical-devices/coronavirus-disease-2019-covid-19-emergency-use-authorizations-medical-devices/in-vitro-diagnostics-euas-antigen-diagnostic-tests-sars-cov-2. Retrieved 07 September 2021. 
  28. American Association for Clinical Chemistry (12 November 2020). "Proper Self-collection of Nasal Swabs Critical for Accurate COVID-19 Testing". Lab Tests Online. American Association for Clinical Chemistry. https://labtestsonline.org/news/proper-self-collection-nasal-swabs-critical-accurate-covid-19-testing. Retrieved 18 November 2020. 
  29. "Lucira COVID-19 All-In-One Test Kit - Instruction for Use" (PDF). Lucira Health. 2020. https://www.fda.gov/media/143808/download. Retrieved 18 November 2020. 
  30. Beale, S. (29 June 2020). "Multiple Studies Raise Questions About Reliability of Clinical Laboratory COVID-19 Diagnostic Tests". Dark Daily. https://www.darkdaily.com/2020/06/29/multiple-studies-raise-questions-about-reliability-of-clinical-laboratory-covid-19-diagnostic-tests/. Retrieved 07 September 2021. 
  31. 31.0 31.1 31.2 West, C.P.; Montori, V.M.; Sampathkumar, P. (2020). "COVID-19 Testing: The Threat of False-Negative Results". Mayo Clinic Proceedings 95 (6): 1127–29. doi:10.1016/j.mayocp.2020.04.004. PMC PMC7151274. PMID 32376102. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7151274.