Journal:A proposed method of sample preparation and homogenization of hemp for the molecular analysis of cannabinoids

From LIMSWiki
Revision as of 21:51, 25 August 2021 by Shawndouglas (talk | contribs) (Saving and adding more.)
Jump to navigationJump to search
Full article title A proposed method of sample preparation and homogenization of hemp for the molecular analysis of cannabinoids
Journal SN Applied Sciences
Author(s) Morehouse, Zachary P.; Ryan, Gabriella, L.; Proctor, Caleb M.; Okparanta, Akelachi; Todd, Will; Bunting, Derrick; White, Taylor; Parez, Steven; Miller, Blessida; Colon, Veronica; Easparro, Brandon; Atwood, James; Park, YoungChul; Nash, Rodney J.
Author affiliation(s) Omni International, Jeevan Biosciences, Georgia State University, AMERICANNA Laboratories
Primary contact Email: Online form
Year published 2021
Volume and issue 3
Article # 762
DOI 10.1007/s42452-021-04747-6
ISSN 2523-3971
Distribution license Creative Commons Attribution 4.0 International
Website https://link.springer.com/article/10.1007%2Fs42452-021-04747-6
Download https://link.springer.com/content/pdf/10.1007/s42452-021-04747-6.pdf (PDF)

Abstract

The use of Cannabis sativa, or hemp, in commercial, recreational, and pharmacological applications is on the rise in the United States and worldwide. Many of these applications have guidelines associated with them dependent on the concentration of cannabinoid molecules that keep the products classified as hemp versus marijuana, or that allow the producer to comment on the purity and potency of their product. Herein, we propose a method for homogenization of hemp that results in small particle sizes, uniform samples, and does not alter the cannabinoid concentrations during processing, allowing for optimal and reproducible potency testing. Using a novel “active grinding media,” we homogenized commercially available hemp to analyze approximately 100 mg samples of homogenate via sieve analysis and high-performance liquid chromatography (HPLC) to assess the resulting size and potency of the sample when using this methodology. When processing hemp samples with our proposed methodology, we have demonstrated the ability to produce 60.2% of all particles < 1.25 mm, with increased cannabinoid recovery compared to homogenates with larger average particle sizes. Maintaining sample temperatures below 35 °C during processing, we showed that our method does not thermally induce decarboxylation reactions that would result in major cannabinoid profile changes. We have developed a method for hemp processing via homogenization that does not alter the cannabinoid profile during processing, while consistently producing small particle sizes in a uniformly processed sample. This method allows for optimal and reproducible hemp processing when evaluating hemp and hemp-based products being brought to commercial markets.

Keywords: hemp, hemp processing, hemp grinding, homogenization, sample preparation, cannabinoid detection, THC, CBD

Background

Cannabis sativa, commonly known as “hemp,” has broad usages in industrial, medicinal, and agricultural applications across the world.[1] Currently, the applications of both hemp and marijuana are being explored in greater detail than previously seen by pharmaceutical and therapeutic applications.[2][3][4] The naturally occurring cannabinoid molecules found in hemp are the basis for its pharmacologic activity and viewed as a presumptive area of increasing importance in the field of pharmacology.[2][3] In addition to the medical application of cannabinoid-based compounds, the use of cannabinoid-infused products is on the rise for recreational usage.[5]

As states across the United States begin to legalize the sale and usage of marijuana and cannabinoid-derived products, there is an increased longing for products that will induce the reported psychoactive or therapeutic effects of these cannabinoids.[2][5][6] With demand for these products exponentially rising, the hemp industry has grown to a billion-dollar industry crossing recreational and medicinal markets for cannabinoids and cannabinoid-derived products.[5] However, as the industry has dramatically expanded in recent years, regulations and best-practice methods have not been keeping up.[6] Currently, there are a variety of unregulated techniques used in hemp processing for sample preparation and the assessment of products for cannabinoid concentrations.

Testing for the cannabinoids Δ9-tetrahydrocannabinolic acid (THCA) and cannabidiolic acid (CBDA), and their decarboxylated counterparts Δ9-tetrahydrocannabinol (THC) and cannabidiol (CBD), are critical in evaluating hemp-based products being brought to market.[7] In the U.S., hemp-based products must remain under certain concentrations of THCA and THC to remain labeled as hemp versus marijuana, a key determination in many areas given the legality of hemp versus marijuana in many municipalities.[8] Additionally, the CBDA and CBD concentrations within products have been related to their analgesic potency, thus accurate measurement and reporting of these values are vital to proper labeling and pricing of these products to protect both the supplier and consumer.[6][7][8]

Herein, we report a method for sample preparation of hemp involving bead-mill-based homogenization using a novel “active grinding media” that provides uniform processing of hemp samples with reproducible particle sizes and no alterations to the carboxylation states of THCA or CBDA. This method allows for accurate potency testing of hemp and hemp-based products through a homogenization that results in a completely processed, homogenous sample.

Methods

Sample preparation and homogenization

To measure cannabinoid potency, commercially available hemp was purchased. Hemp flower was placed in a 50 mL conical tube (Omni International, Cat. No. 19–6650), followed by the placement of the active grinding media (Omni International, Cat. No. 19-900 M) specifically for hemp. Tubes were loaded into the BR96 homogenizer (Omni International, Cat. No. 27–0001) in an even parallel series (2, 4, 6, or 8 tubes). Once loaded, the BR96 homogenizer was operated at 25 Hz for one cycle (15 seconds), two separate cycles (total of 30 seconds), four separate cycles (total of 60 seconds), and six separate cycles (total of 90 seconds).

Sieve analysis

A diamond tap sieves shaker (Esslinger.com, Cat. No. 51.0569) was used. Tap sieve shakers are specified in various standards for particle size analysis. The shaker was used in a horizontal and circular motion, and super-imposed by a vertical motion while administering a taping action. Tap sieve shakers was specified for specific particle size analysis (~ 1.10 mm to 4.50 mm). Starting weight before and after analysis was recorded, and distribution percentages were calculated.

Cannabinoid sample analysis for potency

Approximately 100 mg of homogenized flower matrix was isolated and 5 mL of methanol was added. Sample was sonicated, vortexed, and centrifugated. Supernatant was diluted with MeOH/H2O (80/20, v/v) + 0.1% formic acid as appropriate for injection. Sample was injected (5 μl) into the Agilent 1220 Infinity II LC. The analytical column used was the Infinity Poroshell 120 EC-C18, 3.0 mm × 50 mm, 2.7 μM at 50 °C. Gradient used was 0 to 1 minute, 60% B, 7–8.2 minutes, 60 to 77% B, and 8.2 to 10 minutes, 95% B.

Cannabinoid standards

Standards for THC, THCA, CBD, and CBDA (1 mg/ml) were obtained from Cerilliant (Round Rock, Texas). Standards were combined, and a stock solution with a concentration of 250 ppm for each cannabinoid was made and serially diluted in 100% methanol following the dilution series (Table 1). Fifteen μL of each dilution was diluted further with 35 μLs of 100% methanol and analyzed by reverse phase high-performance liquid chromatography (HPLC).

Table 1. For each listed set, three samples (n = 3) were utilized at the listed weight, and the readings at each weight sieve were then averaged across all three samples to provide the values listed in this table. (n = 3 STD ≤  ± 0.05)
Parameter Particle size distribution Weight sieve 2 Weight sieve 7 Weight sieve 12 Weight sieve 17
1.25 mm 1.88 mm 2.87 mm 3.86 mm
Set-1 1.009 g (n = 3) 0.245 0.357 0.300 0.112
Distribution (%) 24.4 35.5 29.0 11.2
Set-2 1.006 g (n = 3) 0.490 0.414 0.069 0.035
Distribution (%) 48.7 41.2 6.9 3.5
Set-3 1.007 g (n = 3) 0.642 0.238 0.081 0.043
Distribution (%) 63.85 23.69 8.08 4.24
Set-4 1.007 g (n = 3) 0.606 0.268 0.106 0.025
Distribution (%) 60.239 26.673 10.537 2.485

Sample preparation

The six (1 mL samples of the 250-ppm cannabinoid) standards were added to reinforced tubes (2 mL) that were pre-filled with 2.8 mm ceramic beads (Omni International, Kennesaw, GA, Cat. No. 19–628). The tubes were processed on the Bead Ruptor Elite Bead Mill Homogenizer at 5 m/s for increasing durations of 10, 20, 30, 60, and 120 seconds. After each time point, 250 µL was removed to a new 1.5 mL microcentrifuge tube and placed on ice. As a positive control, 500 µL of the 250-ppm cannabinoid standard was placed in a 1.5 mL microcentrifuge tube and heated, at 90 °C, for 180 minutes. All samples were filtered through a 0.2 µm spin filter and 15 µL of the filtrate was combined with 35 µL of 100% HPLC grade methanol for reverse phase HPLC analysis.

Reverse phase HPLC for standards

Cannabinoid separation and quantification was performed on a Waters 1525 HPLC (Waters Corp, Milford, MA) equipped with a binary pump and 2996 photodiode array detector. Buffer A consisted of ddH2O and formic acid (0.2% v/v), and buffer B was Acetonitrile and formic acid (0.2% v/v). Fifteen μL of each sample was separated on a Raptor ARC-18 150 mm × 4.6 mm, 2.7 μm column over a 20-minute linear gradient from 60% B to 100% B at a flow rate of 1.5 mL/minute. Absorbance was measured at 280 nm.

Results

Through the homogenization methods described above, we have shown that our methodology results in homogenate particle sizes < 1.25 mm. Running one cycle of our optimized homogenization parameters yielded 11.2% of particles < 1.25 mm; we observed that with each additional cycle of 15 seconds of homogenization, we were able to increase the percentage of homogenate particles < 1.25 mm to as high as 60.2% of all particles within the sample after four cycles of 15 seconds (Table 1). This data suggests that intermittent homogenization produces a complete homogenate, with the average particle size decreasing after each cycle. As average particle size decreased with each cycle of homogenization, we also observed an increased extraction of CBD, CDBA, THC, and THCA, with a significant increase in the detection of CBD and CBDA (Table 2). These findings are depicted in the resulting average concentration of each cannabinoid and as the relative extraction efficiency, examining the difference in recovered cannabinoids after each homogenization parameter when compared to Set-1.

Table 2. Set-1, 5 m/s for 30 seconds. Set-2, 5 m/s for 60 seconds. Set-3, 5 m/s for 90 seconds. Set-4, 5 m/s for 120 seconds. For each listed set, three samples (n = 3) were utilized at the listed weight and cannabinoid concentration of each were then averaged across all three samples to provide the values listed in this table. (n = 3 STD ≤  ± 0.05)
Homogenization parameters Cannabidiolic acid Cannabidiol 9-Tetrahydrocannabinol Tetrahydrocannabinolic acid
Average concentration (%) Relative extraction efficiency (%) Average concentration (%) Relative extraction efficiency (%) Average concentration (%) Relative extraction efficiency (%) Average concentration (%) Relative extraction efficiency (%)
Set-1 5.47 0.0 1.92 0.0 0.16 0.0 0.15 0.0
Set-2 5.54 1.3 1.96 2.1 0.16 0.0 0.15 0.0
Set-3 5.58 2.0 2.22 15.6 0.16 0.0 0.17 13.3
Set-4 6.34 15.9 2.36 22.9 0.20 25.0 0.16 6.7

References

  1. Russo, Ethan B. (21 August 2007). "History of Cannabis and Its Preparations in Saga, Science, and Sobriquet" (in en). Chemistry & Biodiversity 4 (8): 1614–1648. doi:10.1002/cbdv.200790144. https://onlinelibrary.wiley.com/doi/10.1002/cbdv.200790144. 
  2. 2.0 2.1 2.2 Devsi, Alykhan; Kiyota, Brett; Ouellette, Theophile; Hegle, Andrew P.; Rivera-Acevedo, Ricardo E.; Wong, Jasper; Dong, Ying; Pugsley, Michael K. et al. (1 December 2020). "A pharmacological characterization of Cannabis sativa chemovar extracts" (in en). Journal of Cannabis Research 2 (1): 17. doi:10.1186/s42238-020-00026-0. ISSN 2522-5782. PMC PMC7819338. PMID 33526117. https://jcannabisresearch.biomedcentral.com/articles/10.1186/s42238-020-00026-0. 
  3. 3.0 3.1 Amin, Md Ruhul; Ali, Declan W. (2019), Bukiya, Anna N., ed., "Pharmacology of Medical Cannabis" (in en), Recent Advances in Cannabinoid Physiology and Pathology (Cham: Springer International Publishing) 1162: 151–165, doi:10.1007/978-3-030-21737-2_8, ISBN 978-3-030-21736-5, http://link.springer.com/10.1007/978-3-030-21737-2_8 
  4. Ebbert, Jon O.; Scharf, Eugene L.; Hurt, Ryan T. (1 December 2018). "Medical Cannabis" (in en). Mayo Clinic Proceedings 93 (12): 1842–1847. doi:10.1016/j.mayocp.2018.09.005. https://linkinghub.elsevier.com/retrieve/pii/S0025619618307092. 
  5. 5.0 5.1 5.2 Kumar, Navin; Puljević, Cheneal; Ferris, Jason; Winstock, Adam; Barratt, Monica J. (1 December 2019). "Cannabis use patterns at the dawn of US cannabis reform" (in en). Journal of Cannabis Research 1 (1): 5. doi:10.1186/s42238-019-0003-z. ISSN 2522-5782. PMC PMC7815050. PMID 33526080. https://jcannabisresearch.biomedcentral.com/articles/10.1186/s42238-019-0003-z. 
  6. 6.0 6.1 6.2 Abuhasira, Ran; Shbiro, Liat; Landschaft, Yuval (1 March 2018). "Medical use of cannabis and cannabinoids containing products – Regulations in Europe and North America" (in en). European Journal of Internal Medicine 49: 2–6. doi:10.1016/j.ejim.2018.01.001. https://linkinghub.elsevier.com/retrieve/pii/S0953620518300013. 
  7. 7.0 7.1 Coogan, Thomas A. (1 December 2019). "Analysis of the cannabinoid content of strains available in the New Jersey Medicinal Marijuana Program" (in en). Journal of Cannabis Research 1 (1): 11. doi:10.1186/s42238-019-0011-z. ISSN 2522-5782. PMC PMC7819311. PMID 33526081. https://jcannabisresearch.biomedcentral.com/articles/10.1186/s42238-019-0011-z. 
  8. 8.0 8.1 Mead, Alice (1 May 2017). "The legal status of cannabis (marijuana) and cannabidiol (CBD) under U.S. law" (in en). Epilepsy & Behavior 70: 288–291. doi:10.1016/j.yebeh.2016.11.021. https://linkinghub.elsevier.com/retrieve/pii/S1525505016305856. 

Notes

This presentation is faithful to the original, with only a few minor changes to presentation. Some grammar and punctuation was cleaned up to improve readability. In some cases important information was missing from the references, and that information was added. Nothing else was changed in accordance with the NoDerivatives portion of the license.