Screening (environmental)
 | This article needs attention from an expert in Environment. The specific problem is: I am not an expert, there was nothing in the wiki on this topic, and it needs to be reviewed and added to. See the talk page for details. (September 2020) |
Within the environmental sciences, screening broadly refers to a set of analytical techniques used to monitor levels of potentially hazardous organic compounds in the environment, particularly in tandem with mass spectrometry techniques.[1][2][3][4] Such screening techniques are typically classified as either targeted, where compounds of interest are chosen before the analysis begins, or non-targeted, where compounds of interest are chosen at a later stage of the analysis. These two techniques can be organized into at least three approaches: target screening, using reference standards that are analogous to the target compound; suspect screening, which uses a library of cataloged data such as exact mass, isotope patterns, and chromatographic retention times in lieu of reference standards; and non-target screening, using no pre-existing knowledge for comparison before analysis.[1][2][3][5] As such, target screening is most useful when monitoring the presence of specific organic compounds—particularly for regulatory purposes—which requires higher selectivity and sensitivity. When the number of detected compounds and associated metabolites needs to be maximized for discovering new or emerging environmental trends or biomarkers for disease, a more non-targeted approach has traditionally been used.[4][5][6][7] However, the rapid improvement of mass spectrometers into more high-resolution forms, with increased sensitivity, has made suspect and non-target screening more attractive, either as stand-alone approaches or in conjunction with more targeted methods.[1][2][5][6][8]
Approaches to environmental screening
Mass spectrometry methods are generally used for analysis of environmental contaminant monitoring, particularly in aquatic environments (though they can be applied in non-aquatic environments, such as with screening pesticides on plant matter[9]), paired with chromatography for separation.[2][4][10] For target screening, this means using gas chromatography–mass spectrometry (GC-MS) or liquid chromatography–mass spectrometry (LC-MS) methods "that use single reaction monitoring (SIM) or selected reaction monitoring (SRM) modes."[4] However, for suspect and non-target screening, these methods are inadequate due to recording only a limited number of compounds and insufficient useful information can be determined about unknown compounds, particularly given the dearth of LC-MS comparison libraries.[4] For those non-targeted screening approaches, high-resolution mass spectrometry and high mass accuracy chromatography techniques are required. Combinations of quadrupole, time-of-flight, ion trap, and orbitrap mass spectrometry analyzers have emerged, along with high-performance liquid chromatography (and ultra-high-performance liquid chromatography), to more rapidly and effectively tackle suspect and non-target screening.[2][6][4][10]
Target screening
Target screening or analysis is useful when looking for a short list of predetermined organic compounds in a sample, while ignoring other compounds that may be present. Reference standards that align with the predetermined compounds are available and used to compare attributes such as chromatographic retention time, fragmentation pattern, and isotopic pattern.[10] The workflow for target screening requires the optimization of sample extraction, sample clean-up, and instrumentation methods to those predetermined compounds in order to achieve "a specific and accurate measurement."[2] Most analytical results will be quantitative in nature, given the narrow focus of screening.[2][3] As such, targeted approaches have traditionally been used in regulatory monitoring schemes.[11] The downside, however, is that many hazardous organic compounds are not covered by environmental monitoring regulation and thus not specifically targeted,[8] and the approach is not generally adept for rapid response approaches to providing early warning of contamination events.[11]
Suspect screening
Suspect screening is useful when looking for one or more suspected compounds with known structures in a sample, but reference standards are unavailable or don't exist. In this case, user-built databases containing information such as mass accuracy, retention time, isotopic patterns, and other structure information for the suspected compounds are consulted, filtered, and compared against the results of high-resolution mass spectrometry analyses using SRM or full scans.[3] The structure of the suspected compounds are then elucidated based on that information, ideally confirmed with authentic reference standards.[2][3] Compared to targeted screening, the initial work performed in suspect screening is largely qualitative, with more quantitative work to potentially follow in a more targeted approach.[10] Aside from being able to analyze for more compounds, an additional benefit of this approach is that retrospective analysis, even years later, is enabled without reanalyzing the sample.[4][6] A downside to the suspect approach is the complexity involved, including not only with data analysis (e.g., using in silico fragmentation software[10][8][6]) but also carefully developing suspect screening lists and choosing databases.[8]
Non-target screening
Non-target screening is useful when needing to investigate the presences of all the organic compounds within a sample. In this case, since no information is known about the compounds contained in the sample, no reference standard can be used for comparison, at least initially, overall making non-target screening one of the most challenging approaches. Rather, a full automated scan with mass filtering, peak detection, and other characteristics is used to make initial compound detection. Then elemental composition of detected compounds is deduced using accurate mass of the ions. Database searches can be performed to get a lock on what the most plausible structures are given the elemental composition.[4][10] Like suspect screening, the initial work performed in non-target screening is largely qualitative, with more quantitative work to potentially follow. Similar to suspect screening, the downside to a fully non-targeted approach is the data-intensive nature of the processes, requiring multivariate statistical models, and the wide variety of data processing workflows used by researchers further complicates evaluation of method performance of those data analysis processes.[6]
References
- ^ a b c Fontanals, N.; Pocurull, E.; Marcé, R.M.; Borrull, F. (2019). "Water Analysis - Organic Compounds". In Worsfold, P.; Poole, C.; Townshend, A.; Miró, M. (eds.). Encyclopedia of Analytical Science. Vol. 10 (3rd ed.). Elsevier. pp. 286–298. ISBN 9780081019832.
- ^ a b c d e f g h Schlabach, M.; Haglund, P.; Reid, M.; et al. (2017). Suspect screening in Nordic countries: Point sources in city areas. Nordic Council of Ministers. pp. 13–14. doi:10.6027/TN2017-561. ISBN 9789289352017.
- ^ a b c d e Aceña, J.; Heuett, N.; Garinali, P.; et al. (2016). "Chapter 12: Suspect Screening of Pharmaceuticals and Related Bioactive Compounds, Their Metabolites and Their Transformation Products in the Aquatic Environment, Biota and Humans Using LC-HR-MS Techniques". In Pérez, S.; Eichhorn, P.; Barceló, D. (eds.). Application of Time-of-Flight and Orbitrap Mass Spectrometry in Environmental, Food, Doping, and Forensic Analysis. Wilson & Wilson's Comprehensive Analytical Chemistry. Vol. 71. Elsevier. pp. 357–379. ISBN 9780444635723.
- ^ a b c d e f g h Gosetti, F.; Mazzucco, E.; Gennaro, M.C.; et al. (2016). "Contaminants in water: Non-target UHPLC/MS analysis". Environmental Chemistry Letters. 14: 51–65. doi:10.1007/s10311-015-0527-1. S2CID 100647526.
- ^ a b c Dom, I.; Biré, R.; Hort, V.; et al. (2018). "Extended Targeted and Non-Targeted Strategies for the Analysis of Marine Toxins in Mussels and Oysters by (LC-HRMS)". Toxins. 10 (9). 375. doi:10.3390/toxins10090375. PMC 6162736. PMID 30223487.
- ^ a b c d e f Cavanna, D.; Righetti, L.; Elliott, C.; et al. (2018). "The scientific challenges in moving from targeted to non-targeted mass spectrometric methods for food fraud analysis: A proposed validation workflow to bring about a harmonized approach" (PDF). Trends in Food Science & Technology. 80: 223–41. doi:10.1016/j.tifs.2018.08.007.
- ^ Kacham, J. (11 December 2015). "What is the difference between targeted analysis and non targeted analysis?". ResearchGate. Retrieved 19 September 2020.
- ^ a b c d Gago-Ferrero, P.; Krettek, A.; Fischer, S.; et al. (2018). "Suspect Screening and Regulatory Databases: A Powerful Combination To Identify Emerging Micropollutants". Environmental Science & Technology. 52 (12): 6881–6894. Bibcode:2018EnST...52.6881G. doi:10.1021/acs.est.7b06598. hdl:10261/345529. PMID 29782800.
- ^ Wylie, P.L.; Westland, J.; Wang, M.; et al. (2020). "Screening for More than 1,000 Pesticides and Environmental Contaminants in Cannabis by GC/Q-TOF". Medical Cannabis and Cannabinoids. 3 (1): 14–24. doi:10.1159/000504391. PMC 8489331. PMID 34676338. S2CID 210986718.
- ^ a b c d e f Llorca, M.; Rodríguez-Mozaz, S. (June 2013). State-of-the-art of screening methods for the rapid identification of chemicals in drinking water (PDF). European Commission, Joint Research Centre. doi:10.2788/80087. ISBN 9789279382949.
- ^ a b Clark, A. (2004). "Contamination Monitoring: Screening vs. Targeted Analysis". In Gray, J.; Thompson, K.C. (eds.). Water Contamination Emergencies: Can We Cope?. Royal Society of Chemistry. pp. 77–99. ISBN 0854046283.
Notes
This article is a direct transclusion of the Wikipedia article and therefore may not meet the same editing standards as LIMSwiki.
