Calibration factor
From LIMSWiki
The calibration factor, as defined by the United States Environmental Protection Agency via its SEDD Specification Version 5.2, is "the ratio of the detector response to the amount (mass or concentration) of analyte. It is a factor that is used to convert a detector response to an analyte result."[1]
References
- ↑ U.S. Environmental Protection Agency (March 2019). "Appendix A. Data Element Dictionary (DED)" (PDF). SEDD Specification Version 5.2. https://www.epa.gov/sites/default/files/2019-05/documents/sedd_spec_v5-2-march_2019_508.pdf. Retrieved 21 September 2022.
