Journal:Current approaches in laboratory testing for SARS-CoV-2

Full article title	Current approaches in laboratory testing for SARS-CoV-2
Journal	International Journal of Infectious Diseases
Author(s)	Xu, Yuzhong; Cheng, Minggang; Chen, Xinchun; Zhu, Jialou
Author affiliation(s)	Shenzhen Baoan Hospital, Shenzhen University
Primary contact	Email: zhujialou at szu dot edu dot cn
Year published	2020
Volume and issue	100
Page(s)	7–9
DOI	10.1016/j.ijid.2020.08.041
ISSN	1201-9712
Distribution license	Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Website	https://www.sciencedirect.com/science/article/pii/S1201971220306718
Download	https://www.sciencedirect.com/science/article/pii/S1201971220306718/pdfft (PDF)

Abstract

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus, which originated in Wuhan, Hubei Province, China, has rapidly spread to produce a global pandemic. It is now clear that person-to-person transmission of SARS-CoV-2 has been occurring and that the virus has been dramatically spreading in recent months. Early, rapid, and accurate diagnosis is of great significance for curtailing the spread of SARS-CoV-2. There are currently several diagnostic techniques (e.g., viral culture and nucleic acid amplification test) being used to detect the virus. However, the sensitivity and specificity of these methods are quite different, with the sample source and detection limit varying greatly. This study reviewed all types and characteristics of the currently available laboratory diagnostic assays for detecting SARS-CoV-2 infection and summarized the selection strategies of testing and sampling sites at different disease stages to improve the diagnostic accuracy of testing for the virus' associated disease, coronavirus disease 2019 (COVID-19).

Keywords: novel coronavirus, SARS-CoV-2, COVID-19, laboratory testing, laboratory diagnosis

Discussion

An outbreak of coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) was discovered in Wuhan, China, in December 2019. It then rapidly developed into a global pandemic. As of May 29, 2020 a total of 5,701,337 laboratory-confirmed COVID-19 cases had been reported worldwide, with 357,688 deaths confirmed. Among the effective control measures to reduce transmission in the community, early and reliable laboratory confirmation of SARS-CoV-2 infection is of crucial importance. This review summarizes the advances made in technologies for rapid diagnosis and confirmation of respiratory infections caused by SARS-CoV-2, as well as the selection strategies of testing and sampling sites in SARS-CoV-2 detection.

Since the initial cases of pneumonia of unknown cause were first reported, viral culture and genetic sequencing of isolates obtained from these patients in January 2020 identified within 10 days a novel coronavirus as the etiology. This benefitted understanding of the disease occurrence and transmission, as well as diagnostic test development. Although viral culture is relatively time-consuming and labor-intensive, it is much more useful in the initial phase of emerging epidemics before other diagnostic assays are clinically available. Besides, unbiased, high-throughput sequencing has been proven as a powerful tool for discovering pathogens (Table 1). A detection assay (BGI, Shenzhen, China), based on next-generation sequencing, was approved for emergency use authorization (EUA) by the National Medical Products Administration (NMPA) in China (see Table S1 in the Supplementary data). However, whole genome sequencing is time-consuming and requires specialized instruments with high technical thresholds, and thus is not recommended for widespread clinical use.

Table 1. Laboratory testing for detection of SARS-CoV-2. NAAT, nucleic acid amplification test; RT-PCR, reverse transcription polymerase chain reaction. Testing type Specimen type Characteristics Testing time Limitation Viral culture Respiratory sample Gold standard for virus diagnosis and useful in the initial phase of emerging epidemics 3–7 days Time- and labor-consuming, biosafety level 3 laboratory needed, cannot be widely used in clinical settings NAAT, whole genome sequencing Respiratory sample and blood Detects all pathogens in a given specimen, including SARS-CoV-2, as well as viral genome mutations 20 hours Time-consuming, specialized instruments with high technical thresholds, and high cost NAAT, real-time RT-PCR Respiratory sample, stool and blood Most widely used for laboratory confirmation of SARS-CoV-2 infection 1.5–3 hours Time-consuming procedure, requires biosafety conditions, expensive equipment, skilled personnel, and can have false negative results NAAT, isothermal amplification Respiratory sample, stool and blood Requires only a single temperature for amplification, takes less time yet has comparable performance with real-time RT-PCR, and does not require specialized laboratory equipment 0.5–2 hours False negative results, as real-time RT-PCR Serological testing Serum, plasma and blood Less time required, simple to operate, useful in disease surveillance and epidemiologic research 15–45 minutes Cross-reaction with other subtypes of coronaviruses Point-of-care test Respiratory sample Provides rapid actionable information with good sensitivity and specificity for patient care outside of the clinical diagnostic laboratory 5–30 minutes Risk of quality loss and lack of cost-effectiveness

Real-time reverse transcription polymerase chain reaction (RT-PCR) is routinely used in acute respiratory infection to detect causative viruses from respiratory specimens. The World Health Organization (WHO) recommends that patients who meet the case definition for suspected SARS-CoV-2 should be screened for the virus using a nucleic acid amplification test (Table 1). Various real-time RT-PCR assays for detecting SARS-CoV-2 RNA have been developed worldwide, with different targeted viral genes or regions (Table S1, Supplementary data). To date, 13 and 52 commercial SARS-CoV-2 real-time RT-PCR diagnostic panels have been issued for EUA by China and the U.S., respectively, with the limit of detection varying from 100 to 1000 copies/mL (Table S1, Supplementary data). Although RT-PCR has relatively high sensitivity, there have been reports of multiple false negative tests for the same patients infected with SARS-CoV-2 in China, suggesting that negative results do not preclude the presence of SARS-CoV-2 in a clinical specimen. In addition, fluctuating RT-PCR results have been observed in several patients who first tested positive for SARS-CoV-2, then tested negative in the following test, and returned to being positive in a final test. False negative results may be due to the selection of sampling locations, poor sample quality, low viral load of the specimen, incorrect storage and transportation, as well as laboratory testing conditions and personnel operations. If a highly suspected patient is negative for the virus, the nucleic acid amplification test should be repeated or a more suitable sample should be collected.

Isothermal amplification techniques offer a good alternative to real-time RT-PCR, with comparable performance (Table 1). They take less time and generally do not need specialized laboratory equipment. These techniques include loop-mediated isothermal amplification (LAMP), nucleic acid sequence-based amplification (NASBA), and cross priming amplification (CPA). A recent study suggested that a reverse transcription LAMP (RT-LAMP) assay could detect as low as 20 copies of SARS-CoV-2 ORF1ab RNA, with 100% agreement with the commercial real-time RT-PCR in 130 swabs and bronchoalveolar lavage fluid samples. Another RT-LAMP assay, targeting the N gene of the virus, displayed a detection limit of 100 RNA copies in 30 minutes combined with colorimetric visualization. These results suggest that RT-LAMP assays could be used as a sensitive and specific early detection method with which to identify SARS-CoV-2 cases. Currently, several isothermal amplification-based nucleic acid tests for SARS-CoV-2 detection have received EUAs from China's NMPA (Table S1, Supplementary data).

Serological assays that test for immunoglobin M (IgM) and immunoglobin G (IgG) antibodies provide an alternative diagnostic approach for the current rapidly growing demand for rapid diagnosis of suspected patients and asymptomatic infections. The entire test can be completed in a short time, and be independent of specific equipment or places. They are suggested to be used either in combination with molecular testing or for additional testing in suspected cases with negative nucleic acid results to improve detection accuracy of COVID-19. In a study of 397 real-time RT-PCR-confirmed COVID-19 patients and 128 virus-negative patients, IgM/IgG assays showed a sensitivity and specificity of 88.66% and 90.63% in blood samples, respectively. Combined IgM–IgG tests provided better sensitivity than tests for only IgM or IgG. However, cross-reactivity of the serological assay to other coronaviruses has been observed. However, serological testing remains critically useful in disease surveillance and epidemiologic research. A community seroprevalence study of 863 individuals showed that the prevalence of antibodies to SARS-CoV-2 was 4.65% in Los Angeles County; 367,000 people were estimated to be infected with SARS-CoV-2, which is 43.53 times higher than the cumulative number (8,430) of confirmed cases by the time of the survey.

Point-of-care (POC) diagnostic tests provide rapid actionable information for patient care outside of centralized facilities such as airports, local emergency departments and clinics, and other locations. It has been shown to have an immediate impact on patient management and control of infectious disease epidemics. At the time of writing, three detection assays have been issued EUAs for point-of-care diagnosis of SARS-CoV-2 in the U.S. (Table S1, Supplementary data), including the Xpert Xpress SARS-CoV-2 test (Cepheid, USA) (real-time RT-PCR assay), ID NOW COVID-19 test (Abbott, USA) (isothermal nucleic acid amplification), and Sofia 2 SARS Antigen FIA assay (Quidel, USA) (antigen test). These emerging POC assays would be a powerful tool for effective patient care and outbreak containment of SARS-CoV-2 infection.

Lastly, the selection of specimens for molecular assays is crucial in the laboratory diagnosis of SARS-CoV-2 (Table 2). To prevent misdiagnosis caused by insufficient viral load, bronchoalveolar lavage fluid (BALF) is the most preferred specimen, as the viral loads of respiratory tract specimens are highest in BALF, followed by sputum, nasopharyngeal swabs, and oropharyngeal swabs. (Wang et al., 2020, Yang et al., 2020). Due to the prolonged presence of SARS-CoV-2 viral RNA in fecal samples and potential fecal-oral transmission, fecal testing for SARS-CoV-2 is highly recommended when there is virus negativity in respiratory tract specimens. (Wu et al., 2020) In addition, sampling different sites in suspected people or repeatedly sampling at different infected stages may help to prevent false negative results.

Notes

This presentation is faithful to the original, with only a few minor changes to presentation. Some grammar, punctuation, and repetition was cleaned up to improve readability. In some cases important information was missing from the references, and that information was added. Nothing else was changed in accordance with the NoDerivatives portion of the license.