Difference between revisions of "Medical-grade silicone"

From LIMSWiki
Jump to navigationJump to search
(Transcluded, per John)
 
m (→‎Notes: Added cats)
 
Line 2: Line 2:
==Notes==
==Notes==
This article is a direct transclusion of [https://en.wikipedia.org/wiki/Medical_grade_silicone the Wikipedia article] and therefore may not meet the same editing standards as LIMSwiki.
This article is a direct transclusion of [https://en.wikipedia.org/wiki/Medical_grade_silicone the Wikipedia article] and therefore may not meet the same editing standards as LIMSwiki.
<!---Place all category tags here-->
[[Category:Articles transcluded from other wikis]]
[[Category:Implants (medicine)]]
[[Category:Medical devices]]

Latest revision as of 23:13, 22 February 2016

Medical grade silicones are silicones tested for biocompatibility and are appropriate to be used for medical applications.[1] In the United States, the Food and Drug Administration (FDA) Center for Devices and Radiological Health (CDRH) regulates devices implanted into the body. It does not regulate materials other than certain dental materials. The FDA regulate silicones used in food contact under the auspices of the Center for Food Safety and Nutrition (CFSAN) and for use in pharmaceuticals under the auspices of the Center for Drug Evaluation and Research (CDER).

Medical grade silicones are generally grouped into three categories: non implantable, short term implantable, and long-term implantable. Materials approved as Class V and VI can be considered medical grade. Most medical grade silicones are at least Class VI certified. Silicone suppliers and some silicone prototyping companies provide guidelines for material use.

Uses

Limitations

Silicone rubber applications such as catheters are widespread in medicine, but have several limitations. For example, they exhibit poor tear strength and poor resistance to fatigue. Brittle fracture can occur from defects within sections owing to poor control of vulcanization.[2] It resulted in high failure rates for breast implants, and much subsequent litigation in the US, as well as elsewhere in the world. It led to a crisis of confidence in the US, with many manufacturers being forced out of the business entirely, and others to manufacture under FDA control.

See also

References

  1. ^ Al-Dharrab, Ayman A.; Tayel, Seham B.; Abodaya, Mona H. (2013-03-28). "The Effect of Different Storage Conditions on the Physical Properties of Pigmented Medical Grade I Silicone Maxillofacial Material". ISRN Dentistry. 2013: 582051. doi:10.1155/2013/582051. ISSN 2090-4371. PMC 3625596. PMID 23606978.
  2. ^ Swanson, J. W.; LeBeau, J. E. (1975), "The Effect of Implantation on the Physical Properties of Silicone Rubber", Biomedical Applications of Polymers, Springer US, pp. 197–211, doi:10.1007/978-1-4899-5019-2_18, ISBN 978-1-4899-5021-5


Notes

This article is a direct transclusion of the Wikipedia article and therefore may not meet the same editing standards as LIMSwiki.