Difference between revisions of "User:Shawndouglas/sandbox/sublevel8"

From LIMSWiki
Jump to navigationJump to search
Tag: Reverted
 
(57 intermediate revisions by the same user not shown)
Line 7: Line 7:


==Sandbox begins below==
==Sandbox begins below==
LIMS Selection Guide for ISO/IEC 17025 Laboratories
Material testing can focus on specific industries (e.g., automotive, construction, and pharmaceutical), products (e.g., car seats, asphalt, and medical devices), or raw materials (e.g., steel, gravel, and zirconia ceramic).


1. Introduction to ISO/IEC 17025
About chemical testing of raw materials https://a2la.org/accreditation/chemical-testing/
1.1 History of ISO/IEC 17025
 
1.2 ISO/IEC 17025 vs. ISO 9001
Material testing domains:
1.3 How ISO/IEC 17025 laboratories benefit us
* Aerospace
2. How ISO/IEC 17025 affects and benefits laboratories
**Adhesives
2.1 What ISO/IEC 17025 asks of laboratories
**Composites
2.1.1 Competence, impartiality, and consistent operations
**Fasteners
2.1.2 Demands on the laboratory
**Paints and primers
2.1.3 Addressing gaps in ISO/IEC 17025
**Sealants
2.2 How laboratories benefit from ISO/IEC 17025 compliance
**Etc.
3. Choosing laboratory informatics software for better ISO/IEC 17025 compliance
*Automotive
3.1 Evaluation and selection
**Adhesives
3.1.1
**Coatings
4. Resources for selecting and implementing informatics solutions
**Foams
5. Taking the next step
**Lighting and high-visibility solutions
6. Closing remarks
**Plastics
Appendix 1. LIMSpec and its links to ISO/IEC 17025
**Seating
**Etc.
*Carbon
**Activated carbon
**Coal tar
**Etc.
*Coatings, linings, and sealants
**Ceramic coatings
**Metal coatings
**Pipe linings
**Thermal sprays
**Etc.
*Construction and engineering
**Asphalt
**Brick and tile
**Fasteners
**Fenestration and glazing products (i.e., windows, doors, glass)
**Geosynthetics
**Plumbing
**Soil
**Etc.
* Insulation, foam, and composites
**Fiberglass
**Flexible and laminate urethane foam composite
**Polyester resins
**Etc.
*Lubricants and thickeners
**Metallic stearates
**Powdered metal
**Pre-formed grease thickeners
**Etc.
* Medical devices
**Ceramics
**Metals
**Screws
**Etc.
*Metals
**Aluminum
**Castings
**Copper
**Rebar
**Steel
**Tubing
**Welds
**Zinc
**Etc.
* Packaging and labeling
**Cardboard
**Label adhesives
**Pharmaceutical packaging
**Sterile barrier materials
**Etc.
* Paints and oils
**Interior/Exterior paints
**Organic coatings
**Paint on parts
**Transformer oil
**Etc.
* Paper
**Cellulose paper tape
**Crepe paper and tubes
**Kraft paper
**Pressboard
**Etc.
*Polymers and plastics
**Biopolymers
**Condoms and gloves
**Payment cards
**O-rings
**[https://www.sciencedirect.com/science/article/pii/S1751616121005105 Silicone-based biological tissue mimics]
**Thermoplastic resins
**Etc.
* Raw materials
**Food and beverage ingredients
**Elemental material
**Pharmaceutical ingredients
**Etc.
* Reference materials
**Cannabinoids
**Coals and cokes
**Elemental gasses
**Isotope reference material
**Organic analytical reference material
**Pesticides
**Etc.
*Rubbers
**Bump stops
**Gloves
**Neoprene
**Silicone
**Tires
**Etc.
*Electronics and energy devices
**Batteries
**Semiconductors
**Solar panels
**Transformers
**Etc.
*Textiles
**Carpet
**Drapery
**Non-woven fabrics
**Upholstery
**Etc.
*Wood
**Dowel
**Flooring
**Lumber
**Medium-density fibreboard (MDF)
**Etc.
 
Test method developers:
* Aerospace Industries Association (AIA/NAS/NASM)
* American Architectural Manufacturers Association (AAMA)
* American Association of State Highway and Transportation Officials (AASHTO)
* American Association of Textile Chemists and Colorists (AATCC)
* American Institute of Timber Construction (AITC)
* American National Standards Institute (ANSI)
* American Petroleum Institute (API)
* American Society of Mechanical Engineers (ASME)
* American Welding Society (AWS)
* American Wood Protection Association (AWPA)
* AOAC International (Association of Official Agricultural Chemists; AOAC)
* ASTM International (ASTM)
* Automakers (Ford, GM, Honda, PACCAR, Peugeot, Subaru, Tesla, Toyota, Volvo, etc.)
* Canadian Standards Association (CSA)
* Chemical Fabrics & Film Association (CFFA)
* Consumer Product Safety Commission (CPSC)
* Deutsches Institut für Normung (DIN)
* Electronic Components Industry Association (ECIA/EIA)
* European Telecommunications Standards Institute (ETSI)
* Federal Motor Vehicle Safety Standard (FMVSS)
* FM Approvals (FM)
* GE Aerospace (GE)
* Government and military (MIL, [https://fedspecs.gsa.gov/s/federal-standards Fed], Consumer Product Safety Commission, CSFA, EPA, FDA, MMM, NAVSEA, United Nations Economic Commission for Europe, etc.)
* Industrial Fasteners Institute (IFI)
* Institute of Electrical and Electronics Engineers (IEEE)
* International Atomic Energy Agency (IAEA) ([https://www.iaea.org/topics/material-analysis 1], [https://www.iaea.org/topics/other-non-destructive-testing 2], [https://www.iaea.org/topics/materials 3])
* International Code Council (ICC-ES)
* International Electrotechnical Commission (IEC)
* International Maritime Organization (IMO)
* International Organization for Standardization (ISO)
* International Safe Transit Association (ISTA)
* IPC International (Institute for Interconnecting and Packaging Electronic Circuits; IPC)
* Japanese Standards Association (JAS/JIS)
* NACE International (National Association of Corrosion Engineers; NACE)
* National Fire Protection Association (NFPA)
* [https://www.dot.ny.gov/divisions/engineering/structures/manuals/scm/repository/SCM_4th_Edition_1-2018.pdf New York State Steel Construction Manual (NNSSCM/SCM)]
* NSF International (National Sanitation Foundation; NSF)
* Pressure Sensitive Tape Council (PSTC)
* Radio Technical Commission for Aeronautics (RTCA)
* Suppliers of Advanced Composite Materials Association (SACMA)
* SAE International (SAE/AMS/AS)
* TAPPI (Technical Association of the Pulp and Paper Industry; TAPPI)
* Truss Plate Institute (TPI)
* UL Standards and Engagement (UL)
* United States Pharmacopeia Convention (USP)

Latest revision as of 18:07, 20 September 2023

This is sublevel8 of my sandbox, where I play with features and test MediaWiki code. If you wish to leave a comment for me, please see my discussion page instead.

Sandbox begins below

Material testing can focus on specific industries (e.g., automotive, construction, and pharmaceutical), products (e.g., car seats, asphalt, and medical devices), or raw materials (e.g., steel, gravel, and zirconia ceramic).

About chemical testing of raw materials https://a2la.org/accreditation/chemical-testing/

Material testing domains:

  • Aerospace
    • Adhesives
    • Composites
    • Fasteners
    • Paints and primers
    • Sealants
    • Etc.
  • Automotive
    • Adhesives
    • Coatings
    • Foams
    • Lighting and high-visibility solutions
    • Plastics
    • Seating
    • Etc.
  • Carbon
    • Activated carbon
    • Coal tar
    • Etc.
  • Coatings, linings, and sealants
    • Ceramic coatings
    • Metal coatings
    • Pipe linings
    • Thermal sprays
    • Etc.
  • Construction and engineering
    • Asphalt
    • Brick and tile
    • Fasteners
    • Fenestration and glazing products (i.e., windows, doors, glass)
    • Geosynthetics
    • Plumbing
    • Soil
    • Etc.
  • Insulation, foam, and composites
    • Fiberglass
    • Flexible and laminate urethane foam composite
    • Polyester resins
    • Etc.
  • Lubricants and thickeners
    • Metallic stearates
    • Powdered metal
    • Pre-formed grease thickeners
    • Etc.
  • Medical devices
    • Ceramics
    • Metals
    • Screws
    • Etc.
  • Metals
    • Aluminum
    • Castings
    • Copper
    • Rebar
    • Steel
    • Tubing
    • Welds
    • Zinc
    • Etc.
  • Packaging and labeling
    • Cardboard
    • Label adhesives
    • Pharmaceutical packaging
    • Sterile barrier materials
    • Etc.
  • Paints and oils
    • Interior/Exterior paints
    • Organic coatings
    • Paint on parts
    • Transformer oil
    • Etc.
  • Paper
    • Cellulose paper tape
    • Crepe paper and tubes
    • Kraft paper
    • Pressboard
    • Etc.
  • Polymers and plastics
  • Raw materials
    • Food and beverage ingredients
    • Elemental material
    • Pharmaceutical ingredients
    • Etc.
  • Reference materials
    • Cannabinoids
    • Coals and cokes
    • Elemental gasses
    • Isotope reference material
    • Organic analytical reference material
    • Pesticides
    • Etc.
  • Rubbers
    • Bump stops
    • Gloves
    • Neoprene
    • Silicone
    • Tires
    • Etc.
  • Electronics and energy devices
    • Batteries
    • Semiconductors
    • Solar panels
    • Transformers
    • Etc.
  • Textiles
    • Carpet
    • Drapery
    • Non-woven fabrics
    • Upholstery
    • Etc.
  • Wood
    • Dowel
    • Flooring
    • Lumber
    • Medium-density fibreboard (MDF)
    • Etc.

Test method developers:

  • Aerospace Industries Association (AIA/NAS/NASM)
  • American Architectural Manufacturers Association (AAMA)
  • American Association of State Highway and Transportation Officials (AASHTO)
  • American Association of Textile Chemists and Colorists (AATCC)
  • American Institute of Timber Construction (AITC)
  • American National Standards Institute (ANSI)
  • American Petroleum Institute (API)
  • American Society of Mechanical Engineers (ASME)
  • American Welding Society (AWS)
  • American Wood Protection Association (AWPA)
  • AOAC International (Association of Official Agricultural Chemists; AOAC)
  • ASTM International (ASTM)
  • Automakers (Ford, GM, Honda, PACCAR, Peugeot, Subaru, Tesla, Toyota, Volvo, etc.)
  • Canadian Standards Association (CSA)
  • Chemical Fabrics & Film Association (CFFA)
  • Consumer Product Safety Commission (CPSC)
  • Deutsches Institut für Normung (DIN)
  • Electronic Components Industry Association (ECIA/EIA)
  • European Telecommunications Standards Institute (ETSI)
  • Federal Motor Vehicle Safety Standard (FMVSS)
  • FM Approvals (FM)
  • GE Aerospace (GE)
  • Government and military (MIL, Fed, Consumer Product Safety Commission, CSFA, EPA, FDA, MMM, NAVSEA, United Nations Economic Commission for Europe, etc.)
  • Industrial Fasteners Institute (IFI)
  • Institute of Electrical and Electronics Engineers (IEEE)
  • International Atomic Energy Agency (IAEA) (1, 2, 3)
  • International Code Council (ICC-ES)
  • International Electrotechnical Commission (IEC)
  • International Maritime Organization (IMO)
  • International Organization for Standardization (ISO)
  • International Safe Transit Association (ISTA)
  • IPC International (Institute for Interconnecting and Packaging Electronic Circuits; IPC)
  • Japanese Standards Association (JAS/JIS)
  • NACE International (National Association of Corrosion Engineers; NACE)
  • National Fire Protection Association (NFPA)
  • New York State Steel Construction Manual (NNSSCM/SCM)
  • NSF International (National Sanitation Foundation; NSF)
  • Pressure Sensitive Tape Council (PSTC)
  • Radio Technical Commission for Aeronautics (RTCA)
  • Suppliers of Advanced Composite Materials Association (SACMA)
  • SAE International (SAE/AMS/AS)
  • TAPPI (Technical Association of the Pulp and Paper Industry; TAPPI)
  • Truss Plate Institute (TPI)
  • UL Standards and Engagement (UL)
  • United States Pharmacopeia Convention (USP)
Retrieved from "https://www.limswiki.org/index.php?title=User:Shawndouglas/sandbox/sublevel8&oldid=53056"