ISO/TS 16949 - Revision history

Shawndouglas: Added certification and image

2015-02-21T19:16:36Z

Added certification and image

← Older revision		Revision as of 19:16, 21 February 2015
Line 1:		Line 1:
			[[File:Ifc-composite2.jpg\|thumb\|500px\|Manufacturers of automotive parts supplied to automakers most certainly must get ISO/TS 16949 certified to remain competitive.]]
	'''ISO/TS 16949''' is an [[International Organization for Standardization]] (ISO) technical specification for the development of a quality management system, specifically for the development, production, and, when relevant, installation and servicing of automotive-related products. The standard provides for continual improvement of these processes, emphasizing defect prevention and the reduction of variation and waste in the supply chain. It is based on the [[ISO 9000\|ISO 9001]] standard.		'''ISO/TS 16949''' is an [[International Organization for Standardization]] (ISO) technical specification for the development of a quality management system, specifically for the development, production, and, when relevant, installation and servicing of automotive-related products. The standard provides for continual improvement of these processes, emphasizing defect prevention and the reduction of variation and waste in the supply chain. It is based on the [[ISO 9000\|ISO 9001]] standard.

Line 89:		Line 90:
	===Annex A===		===Annex A===
	''Annex A: Control plan'' "shows the correspondence between ISO 9001:2008 and ISO 14001:2004."<ref name="ISO16949Peek" />		''Annex A: Control plan'' "shows the correspondence between ISO 9001:2008 and ISO 14001:2004."<ref name="ISO16949Peek" />

			==Certification==

			Manufacturers get ISO/TS 16949 certified based of the certification rules issued by the International Automotive Task Force (IATF). Those certification rules changed in April 2014, "intended to strengthen the value of the certification as seen by the customers of the scheme, i.e. the automotive OEMs who receive the products that are produced by the suppliers certified to the scheme."<ref name="BSI16949">{{cite web \|url=http://www.bsigroup.com/LocalFiles/en-US/Documents/TS16949changespresentations.pdf \|format=PDF \|title=Presentation by BSI on the main changes to the IATF ISO/TS 16949 certification scheme \|author=Lomas, Frank \|publisher=The British Standards Institution \|date=14 March 2014 \|accessdate=21 February 2015}}</ref> The new rules place extra emphasis on customer-measured performance as well as audit planning, including additional controls on site extensions, ring fencing, and nonconformity management. In March 2014, standards institute BSI outlined all the changes that took place to the certification process in their document ''Presentation by BSI on the main changes to the IATF ISO/TS 16949 certification scheme''.<ref name="BSI16949" />

			Certifications last three years, and according to the new rules, the first recertification audit should be completed within exactly three years of the initial Stage 2 audit.<ref name="BSI16949" />

	==Further reading==		==Further reading==

			* {{cite web \|url=http://www.bsigroup.com/LocalFiles/en-US/Documents/TS16949changespresentations.pdf \|format=PDF \|title=Presentation by BSI on the main changes to the IATF ISO/TS 16949 certification scheme \|author=Lomas, Frank \|publisher=The British Standards Institution \|date=14 March 2014}}

			==External links==

	* [http://www.iso.org/iso/catalogue_detail?csnumber=52844 ISO/TS 16949 standards at the International Organization for Standardization]		* [http://www.iso.org/iso/catalogue_detail?csnumber=52844 ISO/TS 16949 standards at the International Organization for Standardization]

Shawndouglas: Added content. Saving and adding more.

2015-02-21T18:54:50Z

Added content. Saving and adding more.

← Older revision		Revision as of 18:54, 21 February 2015
Line 1:		Line 1:
	'''ISO/TS 16949''' is an [[International Organization for Standardization]] (ISO) technical specification for the development of a quality management ~~systems~~. It provides for continual improvement of these ~~systems~~, emphasizing defect prevention and the reduction of variation and waste in the supply chain. It is based on the [[ISO 9000\|ISO 9001]] standard, with the first edition published in March 2002 as ISO/TS 16949:2002.<ref name="KarthaISO">{{cite journal \|url=http://www.emeraldinsight.com/journals.htm?articleid=842121&show=html \|title=A comparison of ISO 9000:2000 quality system standards, QS9000, ISO/TS 16949 and Baldrige criteria \|last=Kartha \|first=C.P. \|year=2004 \|journal=The TQM Magazine \|volume=16 \|issue=5 \|publisher=Emerald Group Publishing Limited \|page=336 \|doi=10.1108/09544780410551269}}</ref> It was prepared by the International Automotive Task Force (IATF) and the ISO Technical Committee with the intention of harmonizing the country-specific regulations of quality management systems.<ref>{{cite book \|title=ISO/TS 16949 - Qualitätsmanagement in der Automobilindustrie umsetzen: Qualitätsmanagement in der Autoindustrie umsetzen \|last=Cassel \|first=Michael \|year=2007 \|publisher= Carl Hanser Verlag GmbH & Co. \|location=Germany \|page=1 \|url=http://www.hanser.~~de/buch.asp?isbn=978-3-446-22729-3&area=Technik \|isbn=3-446-22729-6}}</ref>~~		'''ISO/TS 16949''' is an [[International Organization for Standardization]] (ISO) technical specification for the development of a quality management system, specifically for the development, production, and, when relevant, installation and servicing of automotive-related products. The standard provides for continual improvement of these processes, emphasizing defect prevention and the reduction of variation and waste in the supply chain. It is based on the [[ISO 9000\|ISO 9001]] standard.

	~~About 30 percent~~ of the ~~more than 100 existing automobile manufacturers affiliate~~ to the ~~requirements~~, with ~~high~~-~~output Asian manufacturers using their own requirements~~ for the ~~quality management systems~~ of ~~their corporate group~~ and ~~their suppliers~~.		==History==
			ISO/TC 16949 is based on DaimlerChrysler, Ford, and General Motors' QS-9000 quality systems standards as well as the ISO 9000 family of standards. In June 1988, at the ASQ Automotive Division conference, a group of parts suppliers suggested to the attending vice presidents the need for a set of quality assessment standards separate from the ISO 9000 standards, which were introduced only a year earlier. At that time suppliers noted that ISO 9000 "lacked some elements in current automotive industry documents, such as business plans, customer satisfaction, continuous improvement, manufacturing capabilities, and much of the advanced quality planning content."<ref name="GM16949">{{cite web \|url=https://history.gmheritagecenter.com/wiki/index.php/TS_16949_-_The_First_ISO_Technical_Specification \|title=TS 16949 - The First ISO Technical Specification \|author=Reid, R. Dan \|work=GM Heritage Center \|publisher=General Motors \|accessdate=21 February 2015}}</ref> The QS-9000 manual — based on content from ISO 9001 — was eventually released in August 1994, followed by a second edition in February 1995, which caught on worldwide with other original equipment manufacturers (OEMs). A few months later, at a European QS-9000 implementation meeting, representatives for the U.S. automakers learned that similar efforts had already been underway in the forms of "VDA 6.1 in Germany, AVSQ in Italy, and EAQF in France."<ref name="GM16949" /> A desire to further unify these disparate standards was expressed, resulting in the creation of the International Automotive Task Force (IATF).<ref name="Cassel">{{cite book \|url=http://www.hanser-elibrary.com/isbn/9783446227293 \|title=ISO/TS 16949 - Qualitätsmanagement in der Automobilindustrie umsetzen: Qualitätsmanagement in der Autoindustrie umsetzen \|last=Cassel \|first=Michael \|year=2007 \|publisher=Carl Hanser Verlag GmbH & Co \|location=Germany \|page=1 \|isbn=3446227296 \|accessdate=21 February 2015}}</ref>

	TS 16949 applies to the design, development, production and, when relevant, installation and servicing of automotive-related products. The requirements are intended to be applied throughout the supply chain, with vehicle assembly plants being encouraged to seek ISO/TS 16949 certification so as to improve system and process quality, to increase customer satisfaction, to identify problems and risks in production process and supply chain, and to take preventive measures to ensure effectiveness.<ref name="KarthaISO" />		The ISO Technical Committee (TC) 176, responsible for quality management and assurance standards, took notice and, not wanting to fraction ISO 9000 standards into sector-specific branches, attempted to convince the IATF to adopt ISO 9000. However, after several meetings, the TC 176 agreed the family of standards was not comprehensive enough for the automotive industry and vowed to include updates in the next version. Though the technical committee worked with the IATF, their needs were different enough that the automotive-specific changes would not be able to make it into the upcoming 2000 iteration. By November 1997, the two groups agreed on using the ISO technical report as a tool for the requirements, which would be based off of ISO 9001:1994.<ref name="GM16949" />

			By the time the first draft document was created in the fall of 1998, a new type of ISO document became available: a Technical Specification (TS). The IATF agreed to this format, and in November 1998, ISO/TS 16949 was initially approved as the first ISO Technical Specification, with a second official printing arriving in March 1999.<ref name="GM16949" /> In March 2002, a revised ISO/TS 16949:2002 was released to align with changes to ISO 9001, putting more focus on how "to improve effectiveness and efficiency of the entire process instead of a narrow focus on mere compliance with standards."<ref name="Cebos">{{cite web \|url=http://www.cebos.com/automotive-industry-shifts-qs-9000-to-iso-ts-16949-2009/ \|title=The Automotive Industry’s Shift from QS-9000 to ISO/TS 16949:2009 \|publisher=Cebos \|accessdate=21 February 2015}}</ref><ref name="KarthaISO">{{cite journal \|url=http://www.emeraldinsight.com/journals.htm?articleid=842121&show=html \|title=A comparison of ISO 9000:2000 quality system standards, QS9000, ISO/TS 16949 and Baldrige criteria \|last=Kartha \|first=C.P. \|year=2004 \|journal=The TQM Magazine \|volume=16 \|issue=5 \|publisher=Emerald Group Publishing Limited \|page=336 \|doi=10.1108/09544780410551269 \|accessdate=21 February 2015}}</ref> The current version is ISO/TS 16949:2009. It was released in July 2009 and draws off of ISO 9001:2008, "emphasizing defect prevention and the reduction of variation and waste in the supply chain."<ref name="ISO16949-2009">{{cite web \|url=http://www.iso.org/iso/home/news_index/news_archive/news.htm?refid=Ref1234 \|title=New edition of ISO/TS 16949 quality specification for automotive industry supply chain \|publisher=International Organization for Standardization \|date=02 July 2009 \|accessdate=21 February 2015}}</ref>

			==The standard==
			ISO/TS 16949 applies to the design, development, production and, when relevant, installation and servicing of automotive-related products. The requirements are intended to be applied throughout the supply chain, with vehicle assembly plants being encouraged to seek ISO/TS 16949 certification so as to improve system and process quality, to increase customer satisfaction, to identify problems and risks in production process and supply chain, and to take preventive measures to ensure effectiveness.<ref name="KarthaISO" />

			The technical specification is organized as follows<ref name="ISO16949Peek">{{cite web \|url=https://www.iso.org/obp/ui/#iso:std:iso:ts:16949:ed-3:v1:en \|title=ISO/TS 16949:2009(en)
			Quality management systems — Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations \|work=ISO Online Browsing Platform (OBP) \|publisher=International Organization for Standardization \|date=2009 \|accessdate=21 February 2015}}</ref><ref name="AskArt">{{cite web \|url=http://www.askartsolutions.com/ts16949/Major-Clauses.html \|title=Understanding The ISO/TS 16949:2002 Standard \|author=Lewis, Art J \|publisher=Ask Art Solutions \|accessdate=21 February 2015}}</ref>:

			===Introduction===
			This section introduces the perceived importance of quality management systems as well as adopting a process-based approach to their development and implementation. It also addresses its relationship to the ISO 9001, 9004 and 14001 standards.

			===Scope===
			The scope and application of the standard is described as defining "the quality management system requirements for the design and development, production and, when relevant, installation and service of automotive-related products."<ref name="ISO16949Peek" />

			===Normative references===
			This section states the definitions in ISO 9000:2005 are vital to applying the specification.

			===Terms and definitions===
			Additional definitions like "control plan," "error proofing," and "laboratory scope" are defined.

			===Quality management system===
			The requirements for the operational effectiveness of a manufacturer's quality management system are outlined in this section. The requirements are broken down into two subsections:

			'''4.1''' General requirements

			'''4.2''' Documentation requirements

			===Management responsibility===
			This section outlines the managerial responsibilities associated with designing and implementing a quality management system. These responsibilities are broken into six subsections:

			'''5.1''' Management commitment

			'''5.2''' Customer focus

			'''5.3''' Quality policy

			'''5.4''' Planning

			'''5.5''' Responsibility, authority and communication

			'''5.6''' Management review

			===Resource management===
			This section outlines the requirements for managing the various resources needed to develop and maintain a quality management system as well as improve its effectiveness. These responsibilities are broken into four subsections:

			'''6.1''' Provision of resources

			'''6.2''' Human resources

			'''6.3''' Infrastructure

			'''6.4''' Work environment

			===Product realization===
			The requirements for managing the aspects of a quality management system that directly affects how products are designed, produced, and shipped are covered in this section, which spans six subsections:

			'''7.1''' Planning of product realization

			'''7.2''' Customer-related processes

			'''7.3''' Design and development

			'''7.4''' Purchasing

			'''7.5''' Production and service provision

			'''7.6''' Control of monitoring and measuring equipment

			===Measurement, analysis and improvement===
			The requirements of this section address how products created through the quality management system should conform and be continually assessed for improvement. This section is divided into five subsections:

			'''8.1''' General

			'''8.2''' Monitoring and measurement

			'''8.3''' Control of nonconforming product

			'''8.4''' Analysis of data

			'''8.5''' Improvement

			===Annex A===
			''Annex A: Control plan'' "shows the correspondence between ISO 9001:2008 and ISO 14001:2004."<ref name="ISO16949Peek" />

	==Further reading==		==Further reading==

Shawndouglas: Corrected cat

2014-08-06T15:55:45Z

Corrected cat

← Older revision		Revision as of 15:55, 6 August 2014
Line 13:		Line 13:

	<!---Place all category tags here-->		<!---Place all category tags here-->
	[[Category:~~Regulatory information~~]]		[[Category:Production standards]]

Shawndouglas: Internal link

2014-03-27T19:50:04Z

Internal link

← Older revision		Revision as of 19:50, 27 March 2014
Line 1:		Line 1:
	'''ISO/TS 16949''' is an International Organization for Standardization (ISO) technical specification for the development of a quality management systems. It provides for continual improvement of these systems, emphasizing defect prevention and the reduction of variation and waste in the supply chain. It is based on the [[ISO 9000\|ISO 9001]] standard, with the first edition published in March 2002 as ISO/TS 16949:2002.<ref name="KarthaISO">{{cite journal \|url=http://www.emeraldinsight.com/journals.htm?articleid=842121&show=html \|title=A comparison of ISO 9000:2000 quality system standards, QS9000, ISO/TS 16949 and Baldrige criteria \|last=Kartha \|first=C.P. \|year=2004 \|journal=The TQM Magazine \|volume=16 \|issue=5 \|publisher=Emerald Group Publishing Limited \|page=336 \|doi=10.1108/09544780410551269}}</ref> It was prepared by the International Automotive Task Force (IATF) and the ISO Technical Committee with the intention of harmonizing the country-specific regulations of quality management systems.<ref>{{cite book \|title=ISO/TS 16949 - Qualitätsmanagement in der Automobilindustrie umsetzen: Qualitätsmanagement in der Autoindustrie umsetzen \|last=Cassel \|first=Michael \|year=2007 \|publisher= Carl Hanser Verlag GmbH & Co. \|location=Germany \|page=1 \|url=http://www.hanser.de/buch.asp?isbn=978-3-446-22729-3&area=Technik \|isbn=3-446-22729-6}}</ref>		'''ISO/TS 16949''' is an [[International Organization for Standardization]] (ISO) technical specification for the development of a quality management systems. It provides for continual improvement of these systems, emphasizing defect prevention and the reduction of variation and waste in the supply chain. It is based on the [[ISO 9000\|ISO 9001]] standard, with the first edition published in March 2002 as ISO/TS 16949:2002.<ref name="KarthaISO">{{cite journal \|url=http://www.emeraldinsight.com/journals.htm?articleid=842121&show=html \|title=A comparison of ISO 9000:2000 quality system standards, QS9000, ISO/TS 16949 and Baldrige criteria \|last=Kartha \|first=C.P. \|year=2004 \|journal=The TQM Magazine \|volume=16 \|issue=5 \|publisher=Emerald Group Publishing Limited \|page=336 \|doi=10.1108/09544780410551269}}</ref> It was prepared by the International Automotive Task Force (IATF) and the ISO Technical Committee with the intention of harmonizing the country-specific regulations of quality management systems.<ref>{{cite book \|title=ISO/TS 16949 - Qualitätsmanagement in der Automobilindustrie umsetzen: Qualitätsmanagement in der Autoindustrie umsetzen \|last=Cassel \|first=Michael \|year=2007 \|publisher= Carl Hanser Verlag GmbH & Co. \|location=Germany \|page=1 \|url=http://www.hanser.de/buch.asp?isbn=978-3-446-22729-3&area=Technik \|isbn=3-446-22729-6}}</ref>

	About 30 percent of the more than 100 existing automobile manufacturers affiliate to the requirements, with high-output Asian manufacturers using their own requirements for the quality management systems of their corporate group and their suppliers.		About 30 percent of the more than 100 existing automobile manufacturers affiliate to the requirements, with high-output Asian manufacturers using their own requirements for the quality management systems of their corporate group and their suppliers.

Shawndouglas: Added cat.

2012-03-02T23:35:31Z

Added cat.

← Older revision		Revision as of 23:35, 2 March 2012
Line 11:		Line 11:
	==References==		==References==
	<references />		<references />

			<!---Place all category tags here-->
			[[Category:Regulatory information]]

Shawndouglas: Added further reading.

2012-02-29T00:25:23Z

Added further reading.

← Older revision		Revision as of 00:25, 29 February 2012
Line 4:		Line 4:

	TS 16949 applies to the design, development, production and, when relevant, installation and servicing of automotive-related products. The requirements are intended to be applied throughout the supply chain, with vehicle assembly plants being encouraged to seek ISO/TS 16949 certification so as to improve system and process quality, to increase customer satisfaction, to identify problems and risks in production process and supply chain, and to take preventive measures to ensure effectiveness.<ref name="KarthaISO" />		TS 16949 applies to the design, development, production and, when relevant, installation and servicing of automotive-related products. The requirements are intended to be applied throughout the supply chain, with vehicle assembly plants being encouraged to seek ISO/TS 16949 certification so as to improve system and process quality, to increase customer satisfaction, to identify problems and risks in production process and supply chain, and to take preventive measures to ensure effectiveness.<ref name="KarthaISO" />

			==Further reading==

			* [http://www.iso.org/iso/catalogue_detail?csnumber=52844 ISO/TS 16949 standards at the International Organization for Standardization]

	==References==		==References==
	<references />		<references />

Shawndouglas: Created article stub.

2012-02-29T00:23:06Z

Created article stub.

New page

'''ISO/TS 16949''' is an International Organization for Standardization (ISO) technical specification for the development of a quality management systems. It provides for continual improvement of these systems, emphasizing defect prevention and the reduction of variation and waste in the supply chain. It is based on the [[ISO 9000|ISO 9001]] standard, with the first edition published in March 2002 as ISO/TS 16949:2002.<ref name="KarthaISO">{{cite journal |url=http://www.emeraldinsight.com/journals.htm?articleid=842121&show=html |title=A comparison of ISO 9000:2000 quality system standards, QS9000, ISO/TS 16949 and Baldrige criteria |last=Kartha |first=C.P. |year=2004 |journal=The TQM Magazine |volume=16 |issue=5 |publisher=Emerald Group Publishing Limited |page=336 |doi=10.1108/09544780410551269}}</ref> It was prepared by the International Automotive Task Force (IATF) and the ISO Technical Committee with the intention of harmonizing the country-specific regulations of quality management systems.<ref>{{cite book |title=ISO/TS 16949 - Qualitätsmanagement in der Automobilindustrie umsetzen: Qualitätsmanagement in der Autoindustrie umsetzen |last=Cassel |first=Michael |year=2007 |publisher= Carl Hanser Verlag GmbH & Co. |location=Germany |page=1 |url=http://www.hanser.de/buch.asp?isbn=978-3-446-22729-3&area=Technik |isbn=3-446-22729-6}}</ref>

About 30 percent of the more than 100 existing automobile manufacturers affiliate to the requirements, with high-output Asian manufacturers using their own requirements for the quality management systems of their corporate group and their suppliers.

TS 16949 applies to the design, development, production and, when relevant, installation and servicing of automotive-related products. The requirements are intended to be applied throughout the supply chain, with vehicle assembly plants being encouraged to seek ISO/TS 16949 certification so as to improve system and process quality, to increase customer satisfaction, to identify problems and risks in production process and supply chain, and to take preventive measures to ensure effectiveness.<ref name="KarthaISO" />

==References==
<references />